- Current Products
- Windows 10 Drivers
- Product code lookup
- Legacy Products
- Finding your model number
- Software Development Kit
- Technical Support Contact Form
Are you getting error messages 'TV Tuner not available' or getting a message 'Unable to locate capture filter' after installing a Windows 10 update?
This is a known "feature" of the new release of Windows 10, related to video cameras but also affecting TV tuners and video recorders.
The latest versions of WinTV v8.5, WinTV v8 and Hauppauge Capture automatically update the Windows 10 drivers to fix this error message. If you need to manually fix this, click here.
Questions or problems? Please contact Hauppauge support at: firstname.lastname@example.org
Hybrid TV Tuners
Prodinfo: get information on your Hauppauge TV tuner
Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe
HCWClear: remove all driver and files that were installed
HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV application.
Rescan for TV channels
Windows 10 Drivers
Windows 10 requires special drivers to avoid errors during the Hauppauge product installation. The latest versions of WinTV v10, WinTV 8.5, WinTV v8 and Hauppauge Capture include these drivers. But if you are looking just for the Windows 10 driver, these are updated drivers which can be used with Windows 10.
WinTV and HD PVR Drivers
- WinTV-dualHD and WinTV-soloHD
- WinTV-NOVA-S2, PCTV 461e
- WinTV-HVR-935C, WinTV-HVR-955Q, WinTV-HVR-950Q
- WinTV-HVR-930C (16xxx)
- Xbox One TV tuner (ATSC)
- WinTV-HVR-2200, WinTV-HVR-2205
- WinTV-quadHD PCIe, Starburst 2, WinTV-HVR-12xx, WinTV-HVR-1700, WinTV-HVR-1500, WinTV-HVR-1400
- WinTV-HVR-55xx, WinTV-HVR-44xx, WinTV-HVR-33xx
- HD PVR 2 (all models)
- HD PVR 60
- WinTV-NOVA-S-USB2, WinTV-NOVA-HD-USB2
- WinTV-Nova-T stick, WinTV-Duet, WinTV-Nova-TD
- WinTV-HVR-900 (65xxx)
- WinTV-Ministick, WinTV-Ministick2
PCTV Windows Drivers
North America TV tuners
Search for the support page of your Hauppauge product by product code
How to find the product code of your Hauppauge product:
Hauppauge product codes on WinTV internal boards are normally found on the TV tuner. This is a five digit number normally followed by a revision (REV). You need to look at the first two numbers to determine the product type. The other numbers are related to the accessories which are on the product.
On the USB TV tuners and other "boxes", the product code is normally on a label on the bottom of the case.
65xxx, 66xxx WinTV-HVR-935C, -935HD, -930, -900
75XXX, 160xxx WinTV-HVR-1975, WinTV-HVR-1900
69xxx, 121xxx WinTV-HVR-4xxx
HD PVR video recorders
Hybrid Video Recorders
How To Find Your Product Name/Model Number
All of our products have their name written on the front of the packaging however, if you no longer have this you can find the product name by using the Hauppauge 5/6 digit model number on your product and the "Quick product finder" on the right to look it up.
Simply type in your 5/6 digit model number and click on the product name that appears.
Finding the model number on a USB product:
On USB products the model number can be found on the under side of the unit on a white label, simply turn the unit upside-down and locate the white label (Note: You do not need to turn the computer off to do this however some units may have multiple cables attached so caution is advised to avoid cables becoming disconnected or snagged).
Finding the model number on a PCI/PCI-e product:
On PCI/PCI-e products the model number can be found on a white label located on the silver box on the card, you will need to turn off your computer and open the case to examin the board, you may also need to remove the board from the computer to be able to view the label easily. (Note: Make sure you turn the computer off before opening the case, also make sure the board is reinserted into the same slot once you have examind it).
Hauppauge has a new SDK available for .NET applications.
The SDK simplifies the development of TV applications in .NET. The SDK makes it easy for applications to perform functions like querying the available channels, start watching a channel in an application supplied window, pause/play, adjust volume, display OSD graphics, record live tv to a file, etc.
Technical support contact form
Click here for the support contact form