WinTV-NOVA-HD-USB2 Windows driver and applications

WinTV v8 for WinTV-NOVA-HD-USB2

WinTV v8.5 application and TV tuner driver download package

WinTV v8.5 is the latest version of the WinTV v8 application for Windows. This download is a complete WinTV v8.5 installation package, including drivers for supported WinTV products plus utilities.

Installation notes for WinTV v8.5:

A WinTV v8.5 Activation Code will be needed to install this WinTV v8.5 version.

If you have a Hauppauge WinTV-HVR-930C (16xxx), Colossus (not Colossus 2), HD PVR model 1212, WinTV-HVR-1100, WinTV-HVR-1300, WinTV-HVR-1400, WinTV-HVR-3000, WinTV-HVR-4000 or WinTV-NOVA-HD-S2, you MUST use WinTV v8. WinTV v8.5 does not support these products.

If you do not have an WinTV Activation Code, but you have a WinTV v7 CD, you can install the WinTV v8 application.

If you do not have an WinTV Activation Code or your original WinTV v7 CD-ROM, you can purchase a new WinTV v8 Activation Code on the Hauppauge webstore. This can then be used to activate WinTV v8.5.

WinTV v8.5 installer
For Windows 10, 8, and 7

File name: wintv85setup_36326.exe | File size: 115 MB | Date: December 1, 2018
Release notes | Backup download site

To install the WinTV v8.5 application

Note: You will need to have your WinTV v8.5 Activation Code to complete this installation.

  • Download the WinTV v8.5 installer. After downloading this file, it's normally saved in the Download directory on your PC
  • Run wintv85setup from the Download directory on your PC
  • At Activation required, Enter the Activation Code which was emailed to you, or is printed on the WinTV v8 activation card or is printed on the WinTV v8 CD

Note: If you have a WinTV v8 Activation Code for Extend, the latest version of WinTV v8.5 with Extend will also be installed.

Windows Drivers for WinTV-NOVA-HD-USB2

Windows driver for WinTV-NOVA-HD-USB2

To install the latest driver:

Leave your WinTV-NOVA-HD-USB2 into your PC. Follow the following steps:

  • Download the Driver_D9 update
  • Run the EXE file.
  • This will install the USB-Live2 base driver. At the completion of the driver install you should see a message which says Drivers have been updated successfully.

Beta Versions

None at this time