No Signal - Random

[Mikerla]

I have had several instances of opening WinTV and it shows buffering to a previously viewed channel in my DB but then ends up with "No Signal" on screen. Is there something I can look at in a log to see what is causing this? Currently I am running 2.4c.

If restart my PC, Windows 7 64 bit it recovers and the tuner starts working again.

I have missed several scheduled recordings because of this. Does 2.4d fix anything to do with this?

Thanks

Mike

[Mikerla]

This continues to happen - is there any log you can look at to see what is going on?

Thanks

Mike

[Mikerla]

@TNG and Mr X - is there nothing to look at here that could explain this?

This continues to happen - is there any log you can look at to see what is going on?

Thanks

Mike

[NigelF]

Same thing is now happening with me. I thought it was something to do with Digital switch over etc etc so retuned my device and it shows all the channels but still cannot get past the Nog Signal screen on the strongest channel.
I am fed up becasue before I went away about 3 weeks ago it was working fine.
I just cannot work out a reason.

[TheNewGuy]

I'm a bit short on available time currently, but both of you reboot (to reset the logs), then reproduce the problem, and post the ExtendStreaming.txt and WinTVTranscode.txt and I'll try to take a look.

Also, what type of channel are you trying to watch? DVB-T/DVB-S/Analog/ATSC/QAM etc.

[Mr X]

I'm guessing it's more driver/hardware related than application. Is there a particular reproducable pattern? Does it fix itself by unplugging the USB and replugging or just a reboot?

@TNG and Mr X - is there nothing to look at here that could explain this?

[Mr X]

What product do you have?

Same thing is now happening with me. I thought it was something to do with Digital switch over etc etc so retuned my device and it shows all the channels but still cannot get past the Nog Signal screen on the strongest channel.
I am fed up becasue before I went away about 3 weeks ago it was working fine.
I just cannot work out a reason.

[Mikerla]

Traveling this week. Will try to reproduce this weekend and post the logs.

[Mikerla]

I'm a bit short on available time currently, but both of you reboot (to reset the logs), then reproduce the problem, and post the ExtendStreaming.txt and WinTVTranscode.txt and I'll try to take a look.

Also, what type of channel are you trying to watch? DVB-T/DVB-S/Analog/ATSC/QAM etc.

Here are the logs from the "Hung No Signal" condition. If I unplug the USB and put back it starts working again so it sounds like a driver issue...

Update: I just noticed that the latest version is now 2.5c, updated to that and testing.

[Mikerla]

I am still having this problem. Disconnect and reconnect of the USB fixes it. I am updating to 2.5d, I doubt that this will fix the problem.