I am happy with my 1300 apart from one main issue. Its as if its a signal problem, it will just start artifacting for about 10 seconds and then go again. As if signal strength has gone. This is not the case as i cannot replicate it when the aerial is plugged directly into my tv, rather than my media pc.
Could it be the card? The cable picking up interference? The cable is quite a thick one and doesn't have issues directly plugged into the tv.
I am using Windows 7 Media Centre x64 Professional. Latest drivers. It ruins recordings too!
There is a signal quality program in the wintv package (look at start, programs, wintv...). Its icon its a black chip. Does the bars always remain green (and with no errors)?
Win7 32bit - CPU: Phenom 9650 - MOBO: Asus M2N-SLI Deluxe - RAM: 2GB DDR2-800 OCZ - GPU: EVGA nVidia GT240
Hi thanks for the reply
I shall install it and get back to you. Strange how the tv isnt affected
Signal strength is 29. Solid so far. No errors. Ill leave it on overnight, see if i get errors
I assume this is DVB-T right?
Can you make a small recording showing the errors and upload it?
Can you also run this tool and post the log it produces
Click here to see how to capture the right logs files for your problem for WinTV v7. You MUST attach logs files for us to effectively help you.
This forum is User -> User support only. It is a supplement to Phone/E-mail Support. This forum is not monitored by Hauppauge Technical Support. If you require official Technical Support / Customer Service / Pre-Sales please CALL on 020 3405 1717 (UK) or if you are not located in the UK contact numbers are here:
http://www.hauppauge.co.uk/site/contact/contact_us.html or e-mail: http://www.hauppauge.co.uk/site/supp...upcontact.html
Keep up to date with Hauppauge news online