WinTV-HVR-1110 (67559) and WinTV v7 1.3 on Win7 x64 Ultimate

[Loffen]

Hi there.

I cannot get the WinTV to detect my card, i have tried the following:

• Let Windows 7 detect the best driver.

• Driver from the previous WinTV 7 1.2 cd.

• Driver from the WinTV 1.3 cd.

• Driver from hauppauge support site.

Tried the different combinations while running hcwclear with a reboot after each try.

Computer:
Intel Core i7 920 Quad 2,79 ghz
RAM: 6gb
OS: Windows 7 x64 Ultimate (Retail)

Prodinfo from 1.3 CD:
Model 67559 Rev. B1B4
Serial #4027323384
Tuner Model/Formats: Philips 8275A // (MN/BG/I/DK/LL') / DVB-T
Tuner Audio: Stereo (SAA7131)
Video Formats: NTSC ( M ) PAL ( B G H I D K M N NCOMBO ) SECAM ( L L' )
Audio Outputs: None
External Inputs: 2
S-Video Inputs: 2
Teletext:
Radio: FM
Decoder: SAA7131
IR: No
MAC Address: 00-0D-FE-0C-13-F8

EEprom Contents:
84 09 00 04 20 77 00 40 f8 13 0c f0
73 05 29 00
84 08 00 06 e7 07 01 00 94 18 89
72 07 70
73 09 23 5f
73 0a fc 72
72 0b 2f
72 0e 01
72 10 01
72 11 1f
79 9d

hcwI2C32.DLL 2.48.27216
hcwPNP32.DLL 4.122.27042
hcwChDB.dll Not Available
HCWChMgr.ocx Not Available
hcwTVDlg.DLL Not Available
hcwTVWnd.DLL 3, 9, 27047, 0
hcwUtl32.DLL 3.8.22159
hcwSplit.ax Not Available
hcwFRead.ax Not Available
hcwFWrit.ax Not Available
hcwSnap.ax Not Available

Logs and printscreen of winTV7 devices pane attached.

Any tips?

[TheNewGuy]

Can you enabled extended logging, then reboot, then start WinTV, then post the logs again?

[Loffen]

Done

[TheNewGuy]

You see to have the same problem as this thread: http://www.hauppauge.co.uk/board/showthread.php?t=19345

The solution is near the end of that thread.

[Loffen]

Edited C:\Program Files (x86)\WinTV\TVServer\GenPCI.ini to:

[WinTV-HVR-1110-6700]
NAME=WinTV-HVR-1110
MODEL=67019
DEVICE_VEN=1131
DEVICE_VEN_MASK=FFFF
DEVICE_DEV=7133
DEVICE_DEV_MASK=FFFF
DEVICE_SUBSYSTEM=67000000
DEVICE_SUBSYSTEM_MASK=FFFF0000
DEVICE_TYPE=1
SOURCE_COUNT=2
SOURCE_1=DVBT
SOURCE_1_SOURCE=Hauppauge WinTV-HVR 713X BDA DVBT Tuner
SOURCE_1_RECEIVER=Hauppauge WinTV-HVR 713X BDA Digital Capture
SOURCE_1_I2C_METHOD=9
SOURCE_2=ANALOG_SOFTPVR
SOURCE_2_CROSSBAR=Hauppauge WinTV-HVR 713X BDA Analog Xbar
SOURCE_2_TUNER_FORMAT=16
SOURCE_2_I2C_METHOD=10

The tuner is now detected. Would never have found out where it failed by myself. Thanks a bunch for the help and quick answers TheNewGuy

[TheNewGuy]

Great.