Missing Virgin+1 and a couple of others

[ATurnb]

Have loaded ver 1.2 today and seen that after a scan "Virgin+1" hadn't been seen.

I thought that was because it starts at 6.00pm so I've done a new scan and it has found it but this time "yesterday" which stops at 6.00pm hasn't been found.

How can I get all the freeview channels into the list?

I didn't have this problem with ver 1.1 so what's changed?

Is there an add channels option?

Thanks.

(Running WinTV-Nova-500-T with WinXP Pro SP3.)

[TheNewGuy]

Someone else reported this today. I'm going to look into it in the next few hours.

Any chance you can do a scan and post your log.txt file?

[ATurnb]

I've done a scan for you and I can see that it's skipping services.

[mikedepetris]

a first try at 1.2 and the result is I have no more digital channels at all, no dvb-t nor dvb-s on my HVR-4000. I see analog channels only.

Alredy tryed a full uninstall/install with hwclear....

[Orry Verducci]

I have this problem, as does a friend of mine but he's using DVB Viewer, so it would appear something has changed on Mux D that is affecting both apps.

[TheNewGuy]

a first try at 1.2 and the result is I have no more digital channels at all, no dvb-t nor dvb-s on my HVR-4000. I see analog channels only.

Alredy tryed a full uninstall/install with hwclear....

I suspect you dont have the same problem, but post your log.txt and I'll check.

[mikedepetris]

I suspect you dont have the same problem, but post your log.txt and I'll check.

I did a scan just for dvb-t, but it's the same for satellite, please note I can only see analog channels at the moment, I attach logs, even if I think you can's see nothing useful in there.

ScanChannelsBDA.log is not accepted as it is too long but it's just full of lines like:
ScanChannelsBDA starting
Sun Sep 06 22:12:17 2009

Build - v2.7.0.0
Checking for new BDA DVB-T Cards
Tuner - Hauppauge WinTV 88x DVB-T Tuner/Demod
@devicenp:\\?\stream#hcw88bda2.m14xx#4&296280d8&6&2#{7198 5f48-1ca1-11d3-9cc8-00c04f7971e0}\{91b0cc87-9905-4d65-a0d1-00a0c9f21fc7}
Finding Demod and Capture filters
Trying - Hauppauge WinTV 88x TS Capture
@devicenp:\\?\pci#ven_14f1&dev_8802&subsys_69020070&rev_0 5#3&13c0b0c5&0&6a#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5ea9c066-1dfe-41c5-a2de-00a0c9f21fc7}
SUCCESS
Checking for Capture filter
Trying - BDA Slip De-Framer
@devicenp:\\?\root#system#0000#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{03884cb6-e89a-4deb-b69e-8dc621686e6a}&global
Trying - BDA MPE Filter
@devicenp:\\?\root#system#0000#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{8e60217d-a2ee-47f8-b0c5-0f44c55f66dc}&global
Finished Finding Demod and Capture filters
Capture - Hauppauge WinTV 88x TS Capture
@devicenp:\\?\pci#ven_14f1&dev_8802&subsys_69020070&rev_0 5#3&13c0b0c5&0&6a#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5ea9c066-1dfe-41c5-a2de-00a0c9f21fc7}
Tuner - Hauppauge WinTV 88x DVB-S/S2 Tuner/Demod
@devicenp:\\?\stream#hcw88bda2.m69xx#4&296280d8&6&3#{7198 5f48-1ca1-11d3-9cc8-00c04f7971e0}\{91b0cc87-9905-4d65-a0d1-00a0c9f21fc7}
Finding Demod and Capture filters
Finished Finding Demod and Capture filters
Finished Checking for new BDA DVB-T Cards
Found BDA device: Hauppauge WinTV 88x DVB-T Tuner/Demod
# Scanning 84500kHz, 7MHz bandwidth
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = 3000 quality = 0
# signal locked = N present = N strength = 3000 quality = 0
# signal locked = N present = N strength = -9000 quality = 0
# signal locked = N present = N strength = 3000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# Nothing found on 84500kHz, trying +125
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
# signal locked = N present = N strength = -41000 quality = 0
, trying -125
...
, Nothing found

[TheNewGuy]

Given neither WinTV7 or ScanChannelsBDA are finding any sign of channels, it'd make me think that either you're not supplying the device a good signal, or the device is non-functioning (either hardware fault or driver issue).

[mikedepetris]

Given neither WinTV7 or ScanChannelsBDA are finding any sign of channels, it'd make me think that either you're not supplying the device a good signal, or the device is non-functioning (either hardware fault or driver issue).

as the board has worked with previous versions of Wintv7, I think I need to find the time to test it on this PC booting under another OS then actual XPx64 or on another PC, will tell you then

[TheNewGuy]

as the board has worked with previous versions of Wintv7, I think I need to find the time to test it on this PC booting under another OS then actual XPx64 or on another PC, will tell you then

Yes, I think that'd be a good test.