PLEASE NOTE : These are the Community Forums (user-to-user), the Hauppauge team try to assist as
time allows. Please use the email or telephone support if necessary as their tickets
Forum for the HD PVR / Colossus. For WinTV v7.0 issues use the WinTV v7.0 forum
All Fixed Issues Moved Here
Which cables needed to record...
03-04-2012 12:29 PM
Now works on the HD PVR 1 and HD PVR GE
And HD PVR 2 GE and HD PVR 2 GE PLUS
Please note its a software preview
HD PVR 1 and HD PVR GE - Have no live mic or Streaming
might be useful for someone
Hauppauge HD PVR Gaming edition. ShowBiz - How to set YouTube upload resolution to HD
Example of connections for best quality
Forum newbie here.
I'm looking on as much detailed advice as possible. I've owned a PVR for a while now and use it regularly with an xbox360 etc...
I found an old family camcorder which runs 8mm video cassettes, I really want to get the footage onto my pc, but am lost at even where...
Hi will the rgb to hdmi converter (link below) work for converting the pvr's tv output to hdmi. Thanks
Hey everyone, every time I record or even plug my PVR into my laptop, I lag out within 5-10 minutes connected to the internet or not. It doesn't matter what game, I'll just lag out or lag offline. I just recently installed the latest driver for it but that doesn't seem to be helping much either. I...
My HD Colossus was capturing composite and component video fine the last time I used it about 6 weeks ago. Nothing has changed in my pc (windows 7) but now it will not display any AV input at all. What could have caused this? The card is showing fine in device manager and i've tried changing pci...
I bought the HD PVR 1212 to record form my satellite box
It only has HDMI & Yellow , Red , White Outputs ( no Red,Blue,Green Video Outputs )
So i connected the Yellow, Red & White cable to the front of the HD PVR , but the quality is terrible !
only 720 X 520 Resolution Input & no...
I got the HD PVR in October and had no issues with it for about 5 months. At that time I noticed that there would be a subtle stutter on the passthrough screen. I'd lose sound for roughly 3-5 seconds. Then the recording would continue.
On the actual TME screen, for those 3-5...
My son has just brought the HD PVR Gaming edition model 1440. We are struggling to connect this to his TV as there is only a yellow CVBS input into the TV next to the white and red audio input yet all the wires for the PVR are red, green and blue. Do you know how we can get round this?
I have a HD PVR model 1228. Everytime I connect the usb cable from the PVR to my laptop, the usb device is not recognised and comes up as Unknown Device under the USB tab in the device manager. The pvr itself has the blue power light on when the power adapter is plugged in. When I try to install...
Ok im having a really big problem here. when ever i stream my pvr the video goes into a pixalation fit and i having to end up reset the device multipul times in a session its like this on my ps3 and 360.
I've brought my HD PVR out of the cupboard for the first time in about a year and I cannot for the life of me find the USB cable that plugs into the back of it.
What is the specific name of this kind of cable and are you able to order a replacement one?
Is there a way of disabling the noise reduction on the HD pvr? I've noticed my recordings are lacking some definition and look really soft.
Thanks in advance!
Just a quick question I am hoping you guys will be able to answer... I have recently purchased HD PVR Gaming Edition - my question is as follows
I have a Panasonic Viera TV which dont have componant ports directly on the back (you get an adapter with the 5 componant connections on)...
Do you guys have one available? It is the only thing missing that holds up developing a 64-bit capture app?
I've been recording some gameplay footage from my PS3 in M2TS format and have tried to import it into Song Vegas 11, however upon importing it, the preview screen shows the entire video in the top left hand corner... it's not showing the top left hand corner of the recorded footage, the...
I can NOT believe this is the case.
I just plugged in my HD-PVR, with component video and optical audio input connected to my Sky STB. Optical audio output goes to my AVR. I do not have the component output connected since video goes from the STB via HDMI to my AVR.
I find that I get no audio...
whats better to record in?
m2ts, ts or mp4
i got sony vegas 9 so i can drag any of them files in
i render in mp4 so would it be better to record as mp4? so its not changing the formats?
Sky have long since stopped producing set top boxes with analogue component video output, and in the last couple of years, most of the early Thomson boxes started developing faults. I've just tried to replace mine twice on ebay and each of the replacements has a fault of some kind.
I've recently found a problem arising when recording material from Sky using the HD-PVR box. Diagonal lines are visible on my laptop when recording and I've also noticed that the lines also show up on recordings. I attach an example of something I recorded off air yesterday just to show off...
I've had the Hauppauge box for years but only used it to record from Sky boxes, not from the PS3. I bought a cable from Ebay - (PS3 out at one end, component and analogue audio at the other).
The cable was cheap but it has the right connections, I hooked the PVR up to the PS3 and changed the...
My pvr keeps showing these lines. i have had my pvr for 3 years. i have tried reinstalling it from the disk and changing the usb ports but i still can;t find a fix for this. there a small lines but when i put them in a editing software they get worst (pic 2). please can someone help. :confused:
Ok guys so I just can't understand why my TV SCREEN keeps saying no signal when I fit all the cables in, yet, on my computer it shows a perfect image of my ps3 screen.
The weird thing about this is that it was working perfectly yesterday and I recorded a full 57 minute clip ready for editing...
Having difficulties finding my Software disk after I moved to my new apartment.
I tried a demo of the latest arcsoft software, but every capture done with it seems to fail.
I am out of options I can come up with.
I have the colossus and am using the blaster that came with it, i have a pace rng150n xfinity box, and am using windows media center windows 7 32 bit, i use the irconfig app to find several codes that will control the box but the blaster keeps dropping digits, occasionally it will input all three...
I'm having trouble getting my second hand HD PVR to work. In my mind, I've tried everything to no avail.
I've connected the Hauppauge HD PVR to my laptop and it recognises it. I've installed the drivers from the website as the product I got had no disc with it. I also found Total Media...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.