PLEASE NOTE : These are the Community Forums (user-to-user), the Hauppauge team try to assist as
time allows. Please use the email or telephone support if necessary as their tickets
All Products Currently Supported by WinTV v7.x Worldwide (All HVR,NOVA and PVR Products)
All Fixed Issues Moved Here
08-05-2012 10:23 AM
Summary of the issues posted over recent time:
- Fix the WinTV Tray Icon so it always has the same name for example - "WinTV7 Recording"and
put the name of the recording as "subtext". I'm not sure how you present the subtext. I know it is an option as other icons, such as the network icon,...
Here are instructions on setting up Extend
WinTV 7 Manual
The download version is FREE upgrade from previous versions of WinTV v7, WinTV v6 or WinTV 2000.
*** WARNING ***
If you have had CD 2.4b or higher installed you can either upgrade OR if you uninstall, when you reinstall, you will be prompted if you want to use the automatic backup of your...
When a new CD is released All Threads with no posts on for 2 months will automatically be purged, to help improve the support given to you. Please retry on the latest CD and raise a new post against the current CD. (This applies to the WinTV v7 Forums only) Hopefully this will mean threads not...
How-to check signal strength and quality
ScanChannelsBDA is a small program that runs independently from WinTV 7 and can be used to check whether your DVB-T tuner is working correctly. It can be used on Windows XP, Windows Vista and Windows 7.
ScanChannelsBDA is ONLY for scanning digital...
Is there an instruction book available for WinTV 7?
The leaflet is only very sketch and there are lots of things not covered.:(
I have just tried to up date my install to 2.4d.
I have been running Win 7 for a long time on a Windows 7 64 bit desk top with some instability issues so thought that 2.4d might have cleared the problem.
Installed the drivers, rebooted and started to install Win 7 application.
Up came the...
When I cancel a recording before it has ended, that recording still takes up a slot until the original recording's end time.
I hope this can be fixed, as sometimes I do need to cancel recordings to quickly schedule replacements within the same time.
Does it have differences between the one bought from Europe webstore and the one bought from USA webstore?
Also wish to confirm: Does this currently work with HVR 2200 and HVR 1300, and in WinTV v7?
I am trying to capture an analogue signal from a camera through an s-video to s-video connection. This works for one grabber (Syntek112X) - it gives a colour picture but at low resolution. However, for two WinTV grabbers (WinTB-USB (2000) or WinTB-HVR-900) I only get a black and white picture but...
I think it may not be any good for the job! Basically I have an RF Output from a Sky+ box in another room which I have attached to a Magic Eye (to change channels etc) andf I want to be able to watch it on a PC rather than buy another TV.
I ahve installed the Nova-T stick and connected the...
I've just installed WinTv 2.5d for my Hauppauge HVR3000.
According to its spec I should be able to see HD channels of type H.264.
I'd like to see RAI HD, that is a DVB-T free channel broadcasting in Italy.
Actually I can hear the audio but there's no video.
If I enable 3rd Party Decoders In...
i have some issues with the following video renders and maybe someone can help me out.
VMR9 is working mostly fine and I would stick to it but I have a freezing issues when general screen changes happen, i.e.
- screen resolution changes
- UAC privilege escalation
- Lock workstation...
Running WinTV CD 2.4d on XP x64 with a HVR-900H (660) USB card.
Two major issues which occur intermittently usually when watching DVB-T.
1. CaptureGenUSB.exe crashes quite often.
2. TV picture freezes. Only way to resolve it is to restart TV or switch channels.
On both occasions I lose...
If i'm gonna go from say hvr 1300 to 2200 is it worth clearing the dvbt channels ?
Also some where between the last two releases 2.5x the <supportfmradio> setting in settings.xml got set to false any ideas why this would happen on the hvr1300?
When I start WinTV v7.0, with the latest update 2.5d, it starts the "Checking system health" and then - nothing.
I find WinTV running in the task manager (but with zero CPU) but it will not show on the screen.
I enclose the log file. Any ideas?
the new WinTV update is giving me a NO SIGNAL when trying to view any channels on pc,,it worked before the update,,,also the ipad and iphone is now working but I still have to use CMD to get server running
This affect both the composite / svid input and using the analogue tuner.
When setting up and choosing to add new channels by scanning for them, the software freezes and maxes the processor at the initial "Starting Device... Please wait." stage. After about nine minutes it unfreezes, scans and...
Getting an intermittent issue where video freezes but audio keeps playing normally. Have to pause/rewind/forward to reestablish video, or switch channel then back again.
DVB-T, and XP x64 SP2.
Hello !!! I have used my Nova-T MR:70009/C1B5 USB stick quite a lot over the past few months and am now wondering if something inside the thing has finally gone for good.
I have tested it on two aerial leads previously working fine. And on two PCs both working Windows 7 and previously no...
I've just bought the Nova T USB stick and have plugged it into a main USB port on my computer and into my roof aerial, before installing 2.4d from the CD and upgrading it to 2.5 from the web.
However, although I can see a full list of channels, I can only use the radio channels, the TV...
I have just tried to upgrade my WinTV application to 2.5d after downloading the appropriate software, but during the install process I receive a message that ".NET Framework V2.0 Not Detected" (image attached). The message says that I will be forwarded to the Microsoft Download Centre, and an...
I know, CoreAVC is not the OFFICIAL WinTV h264 decoder, but did anybody manage to enable gpu acceleration?
Latest (2.5.5) version works in software mode only with WinTV, while it enables gpu acceleration in other programs (such as Media Player Classic).
i have tried installing on two different PC's with the same results.
I have uninstalled, run HWClear, reinstalled on both machines but the extend services directory is not being created in the WINTV directory. I know I should supply logs with this request for help but I don't know what to supply...
I assume that the Win TV 7 stick only works with a digital aerial BUT is it possible connected to a Digi Box ? My aerial signal is not that brilliant and if it rains some channels are lost. So that is most of this summer lol
I have a HVR-4000, and recently wanted to capture some VHS tapes through the external input.
However, the card will only capture at 640x480, 30 fps.
The card also does this on all 5 terrestrial analogue channels.
Obviously, this is no good to me, I need 720x576 at 25 fps (like my old HVR-1300)....
Have the WinTV v7.0.30151 (CD 2.5d) set up. Earlier i could use the scheduler fine. Just in last few dasy the thing is not operating. Not recording at all. Manual record works.
Would anybody throw any light on this ? Should I reinstall ? I have Windows 7 64 bit.
To whom it may concern:
Hello everybody, small question.
I recently updated to WinTV V7 CD 2.5d for my WINTV-HVR1850 but as I click on the
settings button and then on the general tab, I noticed that on previous updates the
version used to appear on the top left corner,e.g. , CD...
I'm thinking of trying to pick up RTL on Astra 1 at 19.2E. I've got an S2 that works fine with Freesat in Media Center.
I've never really used WinTV in anger. I know the transponder settings that are required, and will be getting a new dish pointed at the right part of the sky. Apart from that...
I have just purchased a HVR-4400.
Installing the drivers and WinTV from the latest CD worked fine.
However, when I scan for channels on DVB-S, no channels are found.
In the logs, I get the following repeatedly for each channel:
Scanning (1/86) '28.2E ASTRA 2, EUROBIRD 1' 10714MHz (H)...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.