Hd Pvr (Model 1228) Only 1 light

[JamieGeorge]

hello Guys

i had it all set up perfect recording fine and everything

http://www.youtube.com/watch?v=EgJOFFo0Vmc

There is a video of what i uploaded.

well the problem is i turned it off to go for dinner then came back upstairs turned it on and now i get1 blue light and thats it all the cables and everything is in just wont work now

http://tinypic.com/player.php?v=2nb6hk7&s=5

Above is the video of me showing what happens.

Hope someone can tell me what is wrong.

[JamieGeorge]

Also both my pc & laptop wont pick it up

[Seraph]

Are you able to try a different USB cable? One blue light should be on, but when you swtich it on the yellow/orange light should blink.

[YouON]

have you resolved?

same problem to me :(

[L2KAdrian]

my PVR only ever seems to have the blue light on and i dont really have any problems. By the looks of it your using it with xbox 360 - same as me. Sometimes when you turn it off, and turn it back on, then turn your xbox on, you just get a blue screen on your tv. At this point for me, i turn both off, turn the PVR on first, then turn my xbox on a few seconds later and the screen flicks back for a second or 2 then the xbox screen comes up. If this doesn't work, then turn the PVR off and on again (leave your xbox on) eventually after a few tries it seems to work again. Not sure why it does this but that method works for me.

[zzPredatorHD]

thanks mate

[TheBadgerHD]

i can see my xbox screen on my computer in arcsoft but my tv screen just says no video signal. when i set it to 1080i (the xbox), when i turn my pvr on and off, the screen flickers but it doesnt work... HELP ME!

[Luke1228]

Are you able to try a different USB cable? One blue light should be on, but when you swtich it on the yellow/orange light should blink.

I turn mine on a blue light on the left comes on then a orange/yellow light on the right comes on for a bout 1 sec and then goes off, but my apple mac wont pick up my hd pvr with eye tv or hd pvr capture please help..?

[Symonator]

i can see my xbox screen on my computer in arcsoft but my tv screen just says no video signal. when i set it to 1080i (the xbox), when i turn my pvr on and off, the screen flickers but it doesnt work... HELP ME!

Because you need to switch your tv to the correct channel, not hdmi anymore.
You are now on ypbpr a normal tv changes to this pressing the "av" button.